THERMOCONDUCT

MATERIAL TEST CERTIFICATE

Certificate No: TC-MTC-__________ | Date: ______________ | Rev.08

Customer________________________

Purchase Order No.________________________

Thermocouple TypeType ___ — ________________

Product FormBare Wire / Stranded / Alloy Semis

Diameterφ________ mm

Quantity________ kg / m / spools

Furnace Batch No.TC-__________-__________

StandardIEC 60584-1 / ASTM E230 / ________

Chemical Composition (wt%)

Element	Ni	Cr	Si	Mn	Al	Fe	Cu	Mg	Other
Positive Leg	____	____	____	____	____	____	____	____	____
Negative Leg	____	____	____	____	____	____	____	____	____

EMF Calibration Results

Calibration Point	Reference Value (mV)	Measured Value (mV)	Deviation (mV)	Deviation (°C)	Pass/Fail
0 °C	0.000	________	________	________	____
200 °C	________	________	________	________	____
400 °C	________	________	________	________	____
600 °C	________	________	________	________	____
800 °C	________	________	________	________	____

Dimensional Inspection

Parameter	Specification	Measured	Result
Diameter	φ________ ±____ mm	________ mm	____
Resistance/m	________ Ω/m	________ Ω/m	____
Surface Quality	Bright / Oxidised / EP	Visual + 40×	____

Declaration of Conformity: We hereby certify that the material described above has been manufactured, tested and inspected in accordance with the referenced standards and meets all specified requirements. Test data is archived and retrievable by furnace batch number. Third-party inspection by SGS or Bureau Veritas is available on request.

CERTIFIED

Production Supervisor

QC Inspector

Quality Manager